Build your own rugged and heavy duty PostHugger™ ROLL AROUND shop/garage table with our USA made 1/8″ thick steel end brackets with welded on, locking/rolling wheel! Each wheel is rated at 300 pounds for an impressive 1,200 pounds of rolling around ability for the set of four! The wheels are an overall height of 4-1/4″, plus the 1/8″ thickness of the steel bracket we weld on.
These wheels will not shear off like other castors when you roll around your heavy cart or hit a rock. Nope! They are 1/8” thick steel frames with welded-on locking castors! Our design means you do not bolt into the bottom of the post at all. Instead, you bolt through our bracket into the side of the post, for better strength!
We use all locking castors so it is easy to find two to step on and lock. Because they are step-lock, when you need to unlock, just lift lever with top of shoe. A lot easier than the kind with a mid-wheel pivot lock where you have to use your hand.
In this listing you can buy just one or a Set of Four of the bad boys. And if you like the look of these wheel brackets but don’t need the castors/wheels welded to the solid steel bottom plate, we’ve added an option to this listing to order the 1/8″ thick steel end bracket only! Use the end-bracket-only as a Corner Protector or weld on a castor yourself to use with a 4×4 Post.
Made for 4×4 POSTS, there are two 1/2″ holes on each of the top ears for fastening to your 6×6 legs. (The holes for the tables legs are offset so that if you want to thru bolt, you don’t have to worry about hitting any of the other installed bolts!) Our brackets can be installed using any 1/2″ wood lag screws or 1/2″ thru bolts. WOOD POSTS AND BOLTS/LAG SCREWS ARE NOT INCLUDED WITH OUR BRACKETS; lifestyle customer photos depict build/use variations only.
We also make Corner Brackets, Flat T brackets for joining other parts of your design, and Bent L’s for use as inside corners. And we make a Legless T™ (no vertical leg), and a Flat L (which is Flat like the T, but without the extra short leg). If you want to mix and match, just let us know how many of each you would like and we will set you up a custom listing.
Made in the USA: All our PostHugger™ Brackets and metal artwork products are Made in America with American-Made Steel!
Visit all our other website offerings here: https://posthugger.com/shop/
Any Questions? Feel free to reach out!
©2022 Thermo-Flex Technologies, Inc. – All Designs, Photos, and Text are the Intellectual Property of Shop Owner and are not to be copied without express written permission.