PostHugger™ 2-Piece Bracket Set For Actual Rough Cut 6″ x 6″ Beam Hanging Light Fixture Support – Made From 1/8″ Plate Steel In USA!


Product Condition: NEW

Order total:


Build your own custom hanging light fixture support system using our 2-piece, USA made PostHugger™ Bracket Set, constructed from 1/8″ thick steel brackets! (You will have to buy the beam, lag bolts and any chains, canopy, wiring, lights/fixtures, etc at your local home improvement store or online).  Note that the first picture is an actual customer picture and shows one beam, fully assembled with lighting installation.

This listing is for a 2-piece set of brackets made to fit a TRUE, ACTUAL 6″ x 6″ beam (not dimensional lumber of 5.5″ x 5.5″).  Before buying, send us a message (to with your actual beam size if your beam is different than an actual 6″ x 6″ rough cut beam and we can let you know the total cost for custom brackets made to fit your posts.

Our brackets can be installed using any 1/2″ wood lag screws.  THE BEAM AND LAG BOLTS ARE NOT INCLUDED with our bracket set; you must use your own hardware and beam.

These brackets are not flimsy/bendable metal. We make them using either 1/8″ thick steel – a single corner bracket weighs just over 2 pounds – – strong enough to take what you throw at it (or what you throw it at!), but not so heavy where they are hard to work with.  We use 1/8″ steel which is thicker than a Quarter and a Dime stacked on top of each other. Also unlike others who just cut and ship steel right off their table, we take the time to hand debur and wire brush both the inside and outside of every piece. And all our PostHugger™ Brackets & metal artwork products are Made in America with American-Made Steel!

We are the original designer of the PostHugger™ brackets, which may be copied, but never equaled! 🙂 If you find a PostHugger™ knockoff, give us a chance to meet or beat their price.

Please note that these ship as raw, unpainted steel. You can order them from us with a black powder coat, paint them the color of your choice, finish them with a clear coat, or allow to achieve a natural rust patina over time. ***Powder Coated Brackets: If ordering brackets in the black powder coat, please allow an additional 1-2 days for shipping & delivery.***

If you would like to see customer photos (and a video!) of some of our brackets in use, click the link

© 2023 Thermo-Flex Technologies, Inc. – All Designs, Photos, and Text are the Intellectual Property of Shop Owner and are not to be copied without express written permission.

Additional information

Weight N/A
Dimensions 6 × 6 × 4 in

1/4" Thick Steel, 1/8" Thick Steel


Unfinished Steel, Black Powder Coat Finish