Sale!

PostHugger™ 12pc PARTIAL-Hexagon Pergola Bracket Set | For 4×4 or 6×6 Posts | 1/8″ Plate Steel Made In USA!

$210.00$310.00

Product Condition: NEW

Order total:

Description

Build your own rugged and heavy duty PostHugger™ Hexagon Shaped Partial or PARTIAL-PERGOLA with our USA made 1/8″ steel corner brackets! Note this is only for the connecting brackets – not any swings, bases, or other hardware – – just the brackets which connect the upright beams to the horizontal beams.

For 4×4 Posts or 6×6 Posts — each set sold separately here; just choose your size and finish (raw steel or powder coated) from the drop-down menus.

This listing is for a set of 12 brackets for a PARTIAL HEXAGON for DIYs where you want to make only part of a hexagon with 4 legs instead of typical 6 legs for a complete hexagon, similar to the photo here of a customer build.  Your two inside posts will use four brackets each at the top (2 sets of 4).  Your two outside outside posts will use two Flat L’s each – one for the inside and one for the outside.  If using 4×4 posts, the holes line up on the Flat L’s so you can bolt all the way through and make a steel/post/steel sandwich.  Other bracket styles fail to attach to the uprights on more than one side, but our PostHugger™ Kit bolts into three sides of each upright on the Hexagon Upright Posts – the left, right and inside for superior strength!  (Scroll to the Gazebo/Pergola photo composite in this listing, from a recent full-sized pergola customer build, to view the Top Outside Bracket placement in main photo and the Inner and Underarm Brackets placement in smaller inset photo.)

Our PostHugger™ design is made even better because we use 1/8″ thick steel!  The result:  over 4 pounds of steel are used to tie together a single completed corner for a 6×6 post! 

WHY BUY POSTHUGGER™?

  • We are the original designer of these brackets, often copied by others but never equaled!
  • We use 1/8″ steel which is thicker than a Quarter and a Dime stacked on top of each other.
  • Unlike others who just cut and ship steel right off their table, we take the time to hand debur and wire brush both the inside and outside of every piece.
  • All powder coating is done in-house to ensure a quality application on each and every piece.
  • We use only 100% first-rate, high quality powders, which are all made in America.
  • We develop all designs ourselves and, unlike some, never poach the intellectual property of others.
  • We proudly stand behind all our products.
  • All our PostHugger™ & metal artwork products are Made in America with American-Made Steel!

Our brackets can be installed using any 1/2″ wood lag screws or 1/2″ thru bolts. If you use lag screws, we recommend at least 1/2″ x 2″ length. WOOD POSTS AND BOLTS/LAG SCREWS ARE NOT INCLUDED WITH OUR BRACKETS; you can pick them up at your local Home Depot/Menard’s/Lowe’s/Ace Hardware store. Lifestyle customer photos depict build/use variations only.

Please note that these ship as raw, unpainted steel. You can order them from us with a black powder coat, paint them the color of your choice, finish them with a clear coat, or allow to achieve a natural rust patina over time.

***Powder Coated Brackets: If ordering brackets in the black powder coat, please allow an additional 1-2 days for shipping & delivery.***

*** If you also would like to see customer photos and videos of some of our brackets in use, click here:  https://posthugger.com/photos/

©2022 Thermo-Flex Technologies, Inc. – All Designs, Photos, and Text are the Intellectual Property of Shop Owner and are not to be copied without express written permission.

Additional information

Weight N/A
Dimensions 6 × 6 × 4 in
Material/Finish

1/8" Thick Steel, 1/8" Thick Steel with Black Powder Coating

Post Size

12 Piece Set for 4×4 Posts, 12 Piece Set for 6×6 Posts